Information

Get updates on changes to City services and closures.

View COVID-19 info and support

Storm drains in Calgary

Storm drains (or catch basins) are the main way stormwater gets into our underground pipes called the stormwater management system.

There are about 60,000 storm drains in Calgary which capture water off sidewalks, streets and roads.

The metal grates that can be seen at the edge of the road are only a portion of the catch basin structure.

Under the sidewalk is a barrel that collects the water. The barrel is attached to a pipe that allows the water to be whisked away into our rivers.



Snow and ice plugging your storm drain

Follow these steps if it's safe and possible to do:

  • Clear snow, ice or debris like leaves and sticks away from the drain.
  • Create a channel to help water flow

Do not attempt to clean a storm drain if:

  • there is significant accumulation of ice,
  • it’s submerged in water,
  • or if the drain is full of debris or if the grate is damaged.

Contact 311. Don’t forget to take a photo of the storm drain and upload it via the 311 app or online request. This helps our crews respond on a priority basis.

Remember, water entering our storm drains eventually travels to Calgary’s rivers and streams without water treatment. Never dump chemicals or use ice salt on storm drains.

 

 

Pooled water on your street

In some areas, The City installs inlet control devices in the storm drains to manage how fast water flows into the pipes from the storm drain.

These devices are designed to keep extra water on the road until the stormwater system can accept the extra water. This prevents the system from becoming overwhelmed with stormwater, avoiding water backups into basements or flooding into houses, garages and businesses.

If the water on the road or street has not drained after 90-120 minutes, please contact 311 or fill out the online service request below.

Water - Storm Drain Concerns

Inlet Control Device slows down stormwater flow  

Protecting your home

There are many ways you can ensure your home is resilient during storm events:

  • Maintain positive drainage on your lot - away from structures without adverse effect to neighbours or public property
  • Conduct regular maintenance and clear debris in eavestroughs and downspouts.
  • Ensure downspouts discharge a minimum of 2 metres from public infrastructure (sidewalks & pathways), 1-2 m from any building foundations, and are directed towards the street, lane or swale, while not impacting your neighbours or public property.
  • Keep any grassed or concrete swales on your property free from debris, ice or obstructions.
  • Regularly inspect grading around your foundation and fill any settling or depressions.
  • Conduct regular maintenance on sump pumps. Ensure sump pumps discharge away from 1-2 m from building foundations, while not impacting your neighbour or public infrastructure.

Melting snow and ice around your home

For tips on how to protect your home during snow and ice melt, see our Dealing with Melting Snow page.


Storm drain locations

The map below shows where storm drains are located. If the storm drain is shown with a blue circle, this indicates that there is device or mechanism which purposely pools water on the street until the stormwater system can accept extra water.

In these areas, allow up to two hours for the water to drain, prior to calling 311. Do contact 311 immediately however, if water is entering a building or vehicle or there is a safety concern.
​​
​​​​​​​ ​ ​ ​​​​​​​​​​​​​​​​​​