Commercial clean fill disposal
Clean fill requirements for business
Commercial customers can bring clean fill to City landfills for disposal.
Commercial vehicles are required to obtain a clean fill approval number at least 24 hours before arriving at the landfill.
Call 403-268-8440 or email email@example.com to obtain an approval number. Your approval number will be valid for 7 days for a specified volume of clean fill.
- Large volume clean fill projects with multiple trucks and trailers required for hauling will not be accepted without prior arrangements.
- The minimum charge of $25/load will apply.
- Clean fill is charged at $0 to $5/tonne.
Which landfills are accepting clean fill?
Find out if City landfills are accepting commercial loads of clean fill (dirt, clay or gravel smaller than six inches).
- Which City of Calgary landfills are accepting clean fill today
- Which truck and trailer sizes are accepted
To find instructions for common business waste items, special items like asbestos or electronics, or to find more information on industrial waste and permits, visit Disposal Options for Commercial Waste.
What is included in clean fill?
Clean fill cannot contain any debris
Mixed loads containing any unacceptable material is NOT considered clean fill and will be charged the basic sanitary waste rate at a City landfill.
If other items are mixed in with the clean fill, it is the landfill's discretion as to what rate will be charged.
Clean fill after rain
Due to muddy conditions, clean fill is not accepted immediately after a rainfall. Typically it takes one to two days without rain for the landfills to dry-out after a rain event. Check Commercial Clean Fill Status to see if landfills are accepting clean fill.
Soil analysis requirements
Generally any type of commercial business will need to have clean fill tested before disposal at a City of Calgary landfill. Complete a clean fill online service request form or contact 311 to schedule an appointment with an Environmental Technologist.
A representative sample or samples of soil, depending on the size and depths of each project are required. With larger excavations, when different material is encountered, new samples are required.