Land Use Bylaw1P2007

The City of Calgary Land Use Bylaw 1P2007

Top of page

Loading Stalls

123 1 A loading stall must be located so that all motor vehicles using the stall can be parked and maneuvered entirely within the boundary of the site before moving onto a street or a lane.
2 A loading stall must have:
a a minimum width of 3.1 metres;
b a minimum depth of 9.2 metres; and
c a minimum height of 4.3 metres.
3 Minimum loading stall dimensions must be clear of all obstructions, other than wheel stops.
4 Wheel stops must not exceed 0.10 metres in height above the loading stall surface and must be placed perpendicular to the loading stall depth a minimum of 0.60 metres from the front of the loading stall.
5 In commercial, industrial, mixed use and special purpose districts the minimum requirement for loading stalls is:
a 1.0 loading stalls per 9300.0 square metres of gross floor area where the cumulative gross floor area of all buildings on a parcel is greater than 930.0 square metres; and
b 0.0 loading stalls where the cumulative gross floor area of all buildings on a parcel is less than or equal to 930.0 square metres.
6 Unless otherwise referenced in subsection (7), the following uses are not included in the calculation of required loading stalls:
e Cemetery;
m.2 Landfill; 
p Military Base;
s Park;
cc Sewage Treatment Plant;
kk deleted
ll Water Treatment Plant.
7 Where a building contains 20 or more units with shared entrance facilities, a minimum of 1.0 loading stalls is required.

This information has no legal status and cannot be used as an official interpretation of the various bylaws, codes and regulations currently in effect. The City of Calgary accepts no responsibility to persons relying solely on this information. Web pages are updated periodically. ​